Replacement Procedures
8-14 Venue 50 – Basic Service Manual
5447566-100 English Rev. 7
Recording important settings and parameters
If any modification has been made to system default settings,
the user presets will be lost after software upgrade. Please
record current user presets and re-config the system after the
upgrade is complete.
You may go to Utility to record the settings and parameters for
General, Settings, Image, Measure, System, Connectivity
and About. You may refer to Chapter 4 in Basic User Manual
(the latest version).
An error, or a power loss may occur.
It is considered to be best practice to always keep a record on
paper of the settings for the Venue 50. Verify if it is current
before you start to load software!
To Next Page
Loading...
