DIRECTION 5854713-100, REVISION 2
VENUE FIT™ SERVICE MANUAL
7-30 Chapter 7 - Diagnostics/Troubleshooting
PRELIMINARY
Figure 7-24 Select Run Loaner Wizard
5.) Disconnect the Disk-On-Key.
3.) On the Loaner system:
1.) Shut down the system
2.) Connect the software Disk-On-Key to any of the system’s USB ports.
3.) Turn on the system.
4.) Select: Run Loaner Wizard
5.) Disconnect the Disk-On-Key
To Next Page
Loading...
