EasyManua.ls Logo

GE VersaMax IC200ERM002 - Versamax General Product Specifications

GE VersaMax IC200ERM002
521 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GFK-1504N Chapter 1 Introduction 1-19
1
VersaMax General Product Specifications
VersaMax products should be installed and used in conformance with product-
specific guidelines, as well as the specifications listed in the following table.
Environmental
Vibration
IEC68-2-6
1G at 57-150Hz, 0.012in p--p at 10-57Hz
Shock
IEC68-2-27
15G, 11ms
Operating Temperature
0 to +60 deg C ambient
-40 to +60 deg C ambient for I/O carriers,
communications carrier, interposing I/O terminals, and
auxiliary I/O terminals
Storage Temperature
-40 to +85 deg C
Humidity
5% to 95%, noncondensing
Enclosure Protection IEC529 Steel cabinet per IP54:
protection from dust & splashing water
EMC Emission
Radiated, Conducted CISPR 11/EN 55011 Industrial Scientific & Medical Equipment
(Group 1, Class A)
CISPR 22/EN 55022
Information Technology Equipment (Class A)
FCC 47 CFR 15 Referred to as FCC part 15,
Radio Devices (Class A)
EMC Immunity
Electrostatic Discharge
EN 61000-4-2
8KV Air, 4KV Contact
RF Susceptibility EN 61000-4-3 10V
rms
/m, 80 to 1000Mhz, 80% AM
ENV 50140/ENV 50204 10V
rms
/m, 900MHz ±5MHZ
100%AM with 200Hz square wave
Fast Transient Burst
EN 61000-4-4
2KV: power supplies, 1KV: I/O, communication
Surge Withstand ANSI/IEEE C37.90a Damped Oscillatory Wave: 2.5KV:
power supplies, I/O [12V-240V]
IEC255-4 Damped Oscillatory Wave: Class II,
power supplies, I/O [12V-240V]
EN 61000-4-5 2 kV cm(P/S); 1 kV cm (I/O and communication
modules)
Conducted RF EN 61000-4-6 10V
rms
, 0.15 to 80Mhz, 80%AM
Isolation
Dielectric Withstand
UL508, UL840, IEC664
1.5KV for modules rated from 51V to 250V
Power Supply
Input Dips, Variations EN 61000-4-11 During Operation: Dips to 30% and 100%,
Variation for AC ±10%,
Variation for DC ±20%

Table of Contents

Related product manuals