GE VersaMax IC200ERM002 - IC200 ALG240 Analog Input Module, 16 Bit Voltage;Current, 1500 VAC Isolation, 8 Channels

10-10 VersaMax Modules, Power Supplies and Carriers User's Manual GFK-1504N
10
IC200ALG240
Analog Input Module, 16 Bit Voltage/Current, 1500 V AC Isolation, 8 Channels
Module Specifications
Module Characteristics
Channels
8 inputs
Module ID
FFFF9802
Isolation:
User input to logic (optical) and frame
ground,
Group to Group
Channel to channel
250 V AC continuous; 1500 V AC for 1 minute
Not applicable
250 V AC continuous; 1500 V AC for 1 minute
LED indicators
FLD PWR LED indicates the presence of both logic power
and user power. OK LED indicates module status.
Backplane current consumption
5V output: 15mA maximum.
3.3V output: 120mA maximum
External power supply:
Range
Current consumption
+19.5 to +30 V DC including ripple
100mA maximum plus load currents
Thermal derating
None
Diagnostics
High/Low Limit, Over/Underrange, Open Wire, Loss of
Field Power Supply, Non-volatile memory fault
Compatibility
PME programming
software
CPU
001
CPU
002
CPU
005
CPU
E05
DBI
001
EBI
001
GBI
001
PBI
001
HW, FW vers.
FW release
All
BC
1.2
AA
1.5
AA
2.1
AA
2.1
AA
1.1
AA
1.0
AB
1.1
BB
1.1
Input Characteristics
Input operating range
Current mode: +1 to 20mA
Voltage mode: ±10 V DC
Accuracy at 25 °C
± 0.1% maximum of full scale
Temperature coefficient
Current mode: 45ppm/°C typical, 90 ppm/°C maximum
Voltage mode: 30ppm/°C typical, 60 ppm/°C maximum
Analog Resolution (1 LSB)
Current mode: 381 nA nominal
Voltage mode: 381 µV nominal
Channel data Update rate per module
Approximately 20 mS max. at 50 Hz filter frequency
Approximately 16.7 mS max. at 60 Hz filter frequency
Channel-to-channel crosstalk rejection
70dB minimum
Input default
0 (default) or Hold Last State (configurable)
Field input DC resistance
Current mode:150 Ω, Voltage mode:760 kΩ
Field input filter
Type: Digital w/programmable notches at 50 or 60 Hz
3 dB Corner Frequency: 10Hz ± 25%
Normal mode (power line frequency)
rejection
35 dB minimum
Field Input Ranges
Current mode: Approximately 0 mA to +25 mA
Voltage mode: Approximately –12.5 V to +12.5 V
Maximum field input (without damage)
Current mode: ± 35 mA continuous
Voltage mode: ± 17.5 V continuous