GE VersaMax IC200ERM002 - IC200 ALG262 Analog Input Module, 15 Bit Differential Current 8 Channels

10-30 VersaMax Modules, Power Supplies and Carriers User's Manual GFK-1504N
10
IC200ALG262
Analog Input Module, 15 Bit Differential Current 8 Channels
Module Specifications
Module Characteristics
Channels
8 differential, one group
Module ID FFFFB508 (when configured for 4-20mA range)
FFFFB408 (when configured for 0-20mA range)
Isolation:
User input to logic (optical) and to
frame ground
Group to group
Channel to channel
250 V AC continuous; 1500 V AC for 1 minute
Not applicable
None
LED indicators
OK LED indicates backplane power is present
Backplane current consumption
5V output: 200mA maximum
External power supply
None
Thermal derating
None
Configuration parameters
Range select (jumpers on carrier)
Diagnostics Loss of Internal Power, Open wire detection of 4-20mA
signals only
Compatibility
PME programming
software
CPU
001
CPU
002
CPU
005
CPU
E05
DBI
001
EBI
001
GBI
001
PBI
001
HW, FW vers.
FW release
All
CE
2.1
AB
2.1
AA
2.1
AA
2.1
No
AB
1.1
BF
2.2
CF
2.2
Input Characteristics
Input current 4 to 20mA (default : no terminal jumper installed)
0 to 20mA (with terminal jumper installed)
Common Mode Range
-10V to +10V
Common mode rejection
70db
Input Impedance
100 Ω
Accuracy (0V Common Mode):
25 °C
†
0 to 60 °C
±0.3% typical of full scale, ±0.5% maximum of full scale
±1% maximum of full scale
Resolution
0.5µA = 1 counts (for 4-20mA range)
0.625µA = 1 counts (for 0-20mA range)
Update rate per module
7.5ms
†
In the presence of severe RF interference, (IEC 1000-4-3, 10V/m), accuracy may be degraded to
±1%. Input accuracy may be degraded an additional ±3% with the introduction of input common mode
voltage.