GE VersaMax IC200PWR002 - IC200 ALG240 Analog Input Module, 16 Bit Voltage;Current, 1500 V AC Isolation, 8 Channels

GFK-1504N Chapter 10 Analog Input Modules 10-9
10
IC200ALG240
Analog Input Module, 16 Bit Voltage/Current, 1500 V AC Isolation, 8 Channels
Analog input module IC200ALG240 provides eight analog inputs. Features
include:
 Eight isolated 4-20mA current input channels
 Sixteen-bit converter resolution
 Open wire detection
 High-accuracy factory calibration
The following additional features are software-configurable:
 Per-channel selection of 4-20mA current or +/–10V voltage inputs
 Selectable input filter to reject normal mode AC pickup noise
 Selection of default/hold last state operation
 Per-channel selection of default values
 Per-channel selection of under-range and over-range diagnostics levels
 Per-channel selection of alarm levels
 Per-channel scaling
1234567 814
IC200ALG240
ANALOG INPUT 16BIT
VOLT/CURR ISO 8CH
OK
FLD
PWR
In current mode, a separate power supply may be required for isolated inputs.
The module provides 8 words of analog input data to the system CPU or NIU.
LED Indicators
The green FLD PWR LED indicates the presence of both backplane power and
field power for the analog field-side circuits. The absence of either backplane or
field power turns off the FLD PWR LED.
The OK LED indicates module status:
 On green indicates normal operation
 Flashing green indicates boot mode or update
 Flashing amber indicates self-diagnostic error
 Off indicates no 3.3V backplane power