GE Versana Balance - 3-9 Connectivity setup

System Setup
3-68 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
3-9 Connectivity setup
3-9-1 EZ configuration Wizard
EZ configuration wizard is a function to enable the operator to
configure some common system settings when turning on the
system for the first time after the software installation.
NOTE: Password setting is required when turning on the system for the
first time after the software installation.
For Versana Balance, you can also enter EZ Configuration
Wizard by clicking the Insite icon at the top right of the screen.
Figure 3-59. Enter Installation Wizard