GE Versana Balance - Change Encryption Password

General Procedures and Functional Checks
4-46 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
4-3-5 Change Encryption Password
After the encryption process is completed, you can change the
password as you wish (for Disk Encryption on R1.0.3 and
Removable Media on R1.0.4 and higher). Take R1.0.3 user
interface as an example.
1. Press Utility -> Admin -> System Admin -> Disk
Encryption. Press Change Password.
Figure 4-45. Change Encryption Password 1