GE Versana Balance - Change Recovery Key

General Procedures and Functional Checks
4-48 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
4-3-6 Change Recovery Key
After the encryption process is completed, you can change the
recovery key as you wish (for Disk Encryption on R1.0.3 and
Removable Media on R1.0.4 and higher). Take R1.0.3 user
interface as an example.
1. Press Utility -> Admin -> System Admin -> Disk
Encryption. Press Save/Change Recovery Key.
Figure 4-48. Change Recovery Key 1
2. Insert a USB to store the new recovery key.
Figure 4-49. Change Recovery Key 2