Monitor Adjustments
Versana Balance – Basic Service Manual System view 6-5
5808768-100 English Rev.9
6-3 Monitor Adjustments
6-3-1 Purpose of this section
This section describes how to test and adjust the scanner.
These tests are optional. You may use them to check the
system for errors.
6-3-2 Monitor Adjustments
Please refer to User Manual for how to adjust the Monitor
Position, Brightness and Contrast.
To adjust the brightness and volume:
1. On the alphanumeric keyboard,
• adjust brightness with Ctrl +Up/Down keys;
• adjust volume with Ctrl +Left/Right keys.
Figure 6-4. Monitor Adjustment
To Next Page
Loading...
