Network and Common Diagnostics
Versana Balance – Basic Service Manual System view 7-35
5808768-100 English Rev.9
7-6-1 Network Configuration(continued)
NOTE: If user wants to setup static IP address, uncheck Enable
DHCP option, input static address in IP-Address box,
Subnet Mask and Default Gateway box. In Network
Speed, choose the proper speed available.
Figure 7-27. Network Settings
3. Select Save, and a popup window displays. Select OK to
restart the system and activate the changes.
Figure 7-28. System Restart inquiry dialog
4. After the system restarts, the network icon on the right top of
the screen shows that the network is available.
Figure 7-29. Network icon
To Next Page
Loading...
