Loading the software
Versana Balance – Basic Service Manual System view 8-11
5808768-100 English Rev.9
8-4-6 Recording important settings and parameters
8-4-6-1 Overview
Always keep a record of the settings for the Versana Balance on
paper. Verify if it is current before starting a software loading! If
needed, record the settings.
This subsection includes descriptions for recording data from
the following screens:
8-4-7 Data Backup
NOTE: The screen graphics in this manual are only for illustrational
purposes. Actual screen output may differ with different users'
systems.
NOTE: For the upgrade option Load the complete disk or Load the
bootable C: partition only, the information for Computer name
and IP setting will be lost. Before upgrade, backup these
information.
An error, or a power loss may occur.
It is considered to be best practice to always keep a record on
paper of the settings for the Versana Balance. Verify if it is
current before you start to load software!
An error, or a power loss may occur.
Always backup the Patient Archive and the Presets (System
Configurations) before loading the software!
To Next Page
Loading...
