Replacement Procedures
8-12 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
8-4-7 Data Backup(continued)
1. Record the information for Computer name and IP setting in
Utility -> Connectivity -> TCP/IP. Refer to
Tabl e 8-2 on
page 8-12.
• If “Enable DHCP” is not selected, record all the
information about IP setting. Refer to a) in Figure 8-3 on
page 8-12
.
• If “Enable DHCP” is selected, only record Computer
name and Network Speed. Refer to b) in Figure 8-3 on
page 8-12.
Figure 8-3. Record IP Setting
Table 8-2: Record Table
Item Name Setting
Computer Name
IP-Address
Subnet Mask
Default Gateway
Network Speed
To Next Page
Loading...
