GE MEDICAL SYSTEMS
D
IRECTION FK091075, REVISION 04 VIVID 3N PRO/EXPERT SERVICE MANUAL
3-64 Section 3-9 - Connectivity Setup
3-9-7 Image Vault Server
If Image Vault Server is required, make sure that the Image Vault Server checkbox is selected, as
shown in Figure 3-47 below, then proceed as follows:
a.) Enter ECHOPAC7-OOOXXX-DB in the Database Name field.
b.) Under Store Info, make sure that the Hard Drive checkbox is selected.
c.) Enter \\ECHOPAC7-000XXX\Archive in the Placement of Image Files field.
d.) Select the Allow Multiframe and/or Allow Raw Data checkboxes, as required.
(It is recommended to leave both checkboxes activated, as shown in Figure 3-47 below).
e.) Under the Image Settings field, select the required settings.
Figure 3-47 Services Tab - Image Vault Server Expanded
To Next Page
Loading...
