GE MEDICAL SYSTEMS
D
IRECTION FK091075, REVISION 04 VIVID 3N PRO/EXPERT SERVICE MANUAL
Chapter 6 Service Adjustments 6-17
6-6-3-2 17" Monitor Function Control Options
Table 6-14 Vivid 3N 17" Monitor Function Controls
Function Description
Brightness Adjusts the background brightness (white level) of the screen.
Contrast Adjusts the contrast level (black level) of the screen.
Position Adjusts the horizontal or vertical screen position to the left, right, up or down.
Size Increases or decreases the screen width or height.
Zoom Adjusts the viewing area of the monitor.
Parallel/Rotation
Adjust the parallelogram setting when the display is leaning left or right; adjust the
rotation setting when the entire display is tilted left or right.
Pincushion/Trapezoid
Adjust the pincushion setting when the sides of the display are bowed in or bowed
out; adjust the trapezoid setting when the top or bottom of the display is too large
or small.
Pinbalance
Adjust the pinbalance setting when the sides of the display are bowed towards the
left or right.
Sidepin Corner
Adjusts the sidepin corner correction when the sides of the display are bowed in
or bowed out; adjust the side pin corner correction when the top or bottom of the
display is too large or small.
Pinbalance Corner
Adjust the Pinbalance Corner correction when the sides of the display are bowed
in or bowed out; adjust the side pinbalance corner correction when the top or
bottom of the display is too large or small.
Color1
Color temperature is a measure of the 'warmth' of the image colors.
The available range is between 5000 to 9300K. Follow these steps to change the
color temperature and adjust individual R,G,B color control.
Note: Recall does not reset the color settings.
Color2
Color temperature is a measure of the 'warmth' of the image colors. The available
range is between 5000 to 9300K. Follow these steps to change the color
temperature and adjust individual R,G,B color control.
Note: Recall does not reset the color settings.
Color3
Color temperature is a measure of the 'warmth' of the image colors.
The available range is between 5000 to 9300K. Follow these steps to change the
color temperature and adjust individual R,G,B color control.
Note: Recall does not reset the color settings.
Clear Moire
A 'Moire' pattern can appear on your screen, looking like a series of concentric
circles or arcs. To eliminate this pattern, use the clear moire adjustments.
Linearity
Adjust the linearity setting when the display image is compressed at the
left/right or top/bottom.
Focus
Use the focus control when the image displayed on the screen is not sharp in all
areas.
Convergence
Convergence affects picture clarity. Adjust the horizontal or vertical convergence
to properly align the color dots that make up the image.
To Next Page
Loading...
