GE MEDICAL SYSTEMS
D
IRECTION FK091075, REVISION 04 VIVID 3N PRO/EXPERT SERVICE MANUAL
Chapter 6 Service Adjustments 6-21
Section 6-8
Calibration
The Diagnostic dialog box (accessed by pressing <Ctrl+F11> or <Alt+D>, when in regular scanning
mode), enables you to perform three types of calibration, as described in the following sections:
• Monitor Calibration section, page 6-23.
• Beamformer Calibration section, page 6-24.
• Video Grabbing Calibration section, page 6-25.
6-8-1 Accessing the Calibration Options
1) Press <Ctrl+F11> (or <Alt+D>) on the alphanumeric keyboard. The Diagnostic dialog box is
displayed, as shown below:
Figure 6-4 Diagnostic Dialog Box
To Next Page
Loading...
