GE MEDICAL SYSTEMS
D
IRECTION FK091075, REVISION 04 VIVID 3N PRO/EXPERT SERVICE MANUAL
8-66 Section 8-5 - Back End Parts Replacement
8-5-3-5 BEP2 - Front Cover Removal Procedure (cont’d)
8-5-3-6 BEP2 - Front Cover Installation Procedure
1) Return the front cover to the front of the BEP and press the two latches on the side, in order to push
the cover back into position.
2) Replace and tighten the two screws to secure the BEP front cover in position - see Figure 8-60
"Front Cover - BEP2" on page 8-65.
Figure 8-61 Front Cover Removal - BEP2
To Next Page
Loading...
