GE MEDICAL SYSTEMS
D
IRECTION FK091075, REVISION 04 VIVID 3N PRO/EXPERT SERVICE MANUAL
8-118 Section 8-8 - Peripherals
8-8-1-4 B&W Printer Installation Procedure
1.) Place the B/W Video Printer on the right side of the Vivid 3N ultrasound unit’s top surface (below
the control console - as shown in Figure 8-100) and next to the VCR (if present), allowing sufficient
room to access the cables at the rear of the printer.
Figure 8-100 B/W Video Printer Installed in the Vivid 3N
|(Configuration for UP2950 and 2800 Printers)
Figure 8-101 B/W Video Printer Installed in the Vivid 3N
|(Configuration with UP21MD Printer)
B/W Video Printer
B/W Video Printer
To Next Page
Loading...
