EasyManua.ls Logo

GE VIVID 3 BT00 - Sony UP-21 MD Color Video Printer Replacement Procedure

GE VIVID 3 BT00
598 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GE MEDICAL SYSTEMS
D
IRECTION FK091075, REVISION 04 VIVID 3N PRO/EXPERT SERVICE MANUAL
Chapter 8 Replacement Procedures 8-145
8-8-5 Sony UP-21MD Color Video Printer Replacement Procedure
NOTE: This section describes the installation and removal procedures of the Sony UP-21MD Color Video
Printer.
The Sony UP-21MD Color Video Printer has an NTSC/PAL Selector on the rear panel.
Figure 8-132 SONY UP-21MD Color Video Printer
In this section, two types of replacement procedures are described, as follows:
For units that are equipped with a previously-installed B/W printer and/or VCR
(see 8-8-4-4 "Color Video Printer Installation - Procedure1" on page 8-135, and 8-8-4-5 "Color
Video Printer Removal - Procedure 1" on page 8-139).
For units that are not equipped with a previously-installed B/W printer and/or VCR
(refer to 8-8-4-6 "Color Video Printer Installation - Procedure 2" on page 8-140, and 8-8-4-7 "Color
Video Printer Removal - Procedure 2" on page 8-140).
8-8-5-1 Tools
Use the appropriate flat and Phillips-type screw drivers.
8-8-5-2 Manpower
One person - 30 mins.

Table of Contents

Related product manuals