GE MEDICAL SYSTEMS
D
IRECTION FK091075, REVISION 04 VIVID 3N PRO/EXPERT SERVICE MANUAL
8-150 Section 8-8 - Peripherals
8-8-5-4 Sony UP-21MD Color Video Printer Installation - Procedure1 (cont’d)
18.)Connect the Ground cable (hanging out of the Bottom Metal Cover) to the Ground screw at the rear
of the UP-21MD Color Video Printer, as shown in Figure 1-17 below
Figure 8-138 UP-21MD Color Video Printer Ground Cable Connection
19) Connect the RGB and SYNC cables, Color Printer Remote cable, and AC power cable (hanging out
of the Bottom Metal Cover slot - see Color Printer Cables through Metal Bottom Cover Slot section,
page 8-147), to the UP-21MD Color Video Printer, as shown in the diagram in Figure 8-139 "Sony
UP-21MD Color Video Printer Connection Cables" on page 8-151.
Ground Cable
Ground Screw
To Next Page
Loading...
