GE Vivid 7 - Page 579

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 7 - Diagnostics/Troubleshooting 7 - 67
7-8-3-2 The System Test Screen - FEP1
Figure 7-72 System Test Screen (FEP1)
Table 7-4 Choices on the System Test Screen on units with FEP1
ITEM DESCRIPTION COMMENTS
1
MODULE NAME ETC.
2
SYSTEM:TEST ALL See 7-8-3-5 "Test Loops, System" on page 7-69
3
TEST LOOPS See 7-8-3-5 "Test Loops, System" on page 7-69
4
BREAK See 7-8-3-5 "Test Loops, System" on page 7-69
5
“BLOCK DIAGRAM” WITH SINGLE TESTS
SELECT THE CARD YOU WANT TO TEST, see 7-8-3-7 "“Block Schematics” with
Single Tests" on page 7-71
6
STATUS FIELD
7
PROGRESS FIELD
8
STATUS LIGHT RED = FAILED, GREEN = PASSED
9
DATA FIELD DISPLAYS INFORMATION ABOUT THE TESTS
10
MODULE SPECIFIC TESTS SEE 7-8-3-9 "Relay Board Test" on page 7-72
11
MODE SELECT: TEST OR CALIBRATION
SELECT CALIBRATION TO GO TO THE CALIBRATION SCREEN, SEE 7-8-2
"Calibration Screen" on page 7-64
1
2
3
4
5
6 7
8
9
10
11