GE Vivid 7 - Page 580

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
7 - 68 Section 7-8 - Acquisition Diagnostics
7-8-3-3 The System Test Screen - FEP2
Figure 7-73 System Test Screen (FEP2)
Table 7-5 Choices on the System Test Screen on units with FEP2
ITEM DESCRIPTION COMMENTS
1
MODULE NAME ETC.
2
SYSTEM:TEST ALL See 7-8-3-5 "Test Loops, System" on page 7-69
3
TEST LOOPS See 7-8-3-5 "Test Loops, System" on page 7-69
4
BREAK See 7-8-3-5 "Test Loops, System" on page 7-69
5
“BLOCK DIAGRAM” WITH SINGLE TESTS
SELECT THE CARD YOU WANT TO TEST, see 7-8-3-7 "“Block Schematics”
with Single Tests" on page 7-71
6
STATUS FIELD
7
PROGRESS FIELD
8
STATUS LIGHT RED = FAILED, GREEN = PASSED
9
DATA FIELD DISPLAYS INFORMATION ABOUT THE TESTS
10
MODULE SPECIFIC TESTS SEE 7-8-3-9 "Relay Board Test" on page 7-72
11
MODE SELECT: TEST OR CALIBRATION
SELECT CALIBRATION TO GO TO THE CALIBRATION SCREEN, SEE 7-8-2
"Calibration Screen" on page 7-64
1
2
4
5
8
9
3
6
7
10
11