GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-111
The View Test Log dialog box is displayed, as shown in Figure 7-76 below.
17.)Trackball to the Exit button and press Set to close the View Test Log dialog box.
18) Proceed as follows:
• If the test passed but the original problem persists, contact your local On-Line Center for
assistance.
19.)Press the <Esc> button on the keyboard to close the Diagnostic Test Window.
Figure 7-76 View Test Log - Extended Keyboard Test
To Next Page
Loading...
