GE Vivid q N - Page 627

GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-121
8-5-2-2 Additional BIOS Settings
This section details how additional BIOS parameters should be configured. The table below lists the
parameters that are shown in this section.
1.) From the BIOS main menu (see Figure 8-114), select the <Advanced> menu and press <Enter>.
2.) Select the <Security> menu and press <Enter>.
3.) Set the parameters in the Security screen as shown above in Figure 8-125.
4.) Press <Esc> to return to the main BIOS screen (Figure 8-114 on page 8-114).
BIOS Parameter Corresponding Figure
Security Figure 8-125 on page 8-121
Power Figure 8-126 on page 8-122
Boot Figure 8-127 on page 8-122
Figure 8-125 BIOS Security Parameters