GE Vivid q N - Page 628

GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
8-122 Section 8-5 - Software Loading
5.) Select the <Power> menu and press <Enter>.
6.) Set the parameters in the Power screen as shown above in Figure 8-126.
7.) Press <Esc> to return to the main BIOS screen (Figure 8-114 on page 8-114).
8.) Select the <Boot> menu and press <Enter>.
9.) Set the parameters in the Boot parameters screen as shown above in Figure 8-127.
10.)Press <Esc> to return to the main BIOS screen (Figure 8-114 on page 8-114).
Figure 8-126 BIOS Power Parameters
Figure 8-127 BIOS Boot Parameters