GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-161
PRELIMINARY
2) Re-connect the two TR32 Boards to each other (gently press together as shown in Figure 8-201).
3.) Prepare the RFI Board by applying a strip of Kapton tape to each of the two areas illustrated in
Figure 8-202
.
Note: Kapton tape not visible in printed copy.
Figure 8-201 Reattaching the Two TR32 Boards to Each Other
Figure 8-202 Kapton Tape Adhered to Two Areas on the RFI Board
To Next Page
Loading...
