GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
8-216 Section 8-8 - Software Loading
PRELIMINARY
When all files have been copied, the following options are displayed:
10. Select the following option:
Reboot Machine
then press <Enter>.
The following Warning message is displayed:
11. Press [Yes] to continue. The following message is displayed:
Table 8-2 Step-by-Step Software Upgrade/Installation/Reinstallation Procedure (cont’d) 4 of 9
Step Instruction Expected Result
To Next Page
Loading...
