Scanning Modes
Vivid S5/Vivid S6 User Manual 171
R2424458-100 Rev. 2
Color maps
Displays a menu of color map options. Use the assignable
rotary knob to select and activate a desired color map. Each
color map is assigning different color hues to different
velocities.
Q-Analysis (in Freeze only)
Starts the Quantitative analysis application (see Chapter 8,
"Quantitative Analysis" on page 375).
Alternative assignable controls
Press ALT to access the following modes:
• Tissue Synchronization Imaging (see page 188)
• Tissue Tracking (see page 173)
• Curved Anatomical M-Mode (see page 155)
• Strain rate (see page 178)
• Strain (see page 183)
TVI Soft menu controls
Compress
Controls the amount of color compression. The color bar is
adjusted accordingly.
Tilt
Enables the axis of the 2D image to be tilted to the left or right.
By using this control in combination with angle control the
image can be “aligned” to the direction of interest, and frame
rates be optimized. By default the axis of symmetry of a 2D
image is vertical. Tilting of the 2D image will tilt the TVI ROI
along with it.
Threshold
Controls the level of greyscale intensity that is used as a
threshold for color.
Transparency
Controls the degree of transparency of the TVI color.
Frequency
Enables the adjustment of the transmission frequency to
control the sensitivity or the level of penetration.
To Next Page
Loading...
