Measurement and Analysis
278 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
You may adjust the shape of the ROI by moving the cursor over
the inner ROI border, select an anchor point (red circle), press
and hold SET button and move the red mark to a new location
(Figure 7-14). The shape of the ROI is updated accordingly.
Figure 7-14: Selected anchor point on the inner ROI border
Note: System may be configured so that data processing is
started automatically if the cursor is not moved for a few
seconds (Figure 7-15).
Note: The auto processing function is configurable (from
Config/Meas-Text/Advanced/AFI/AutoEF auto processing).
Figure 7-15: AFI auto processing configuration
CAUTION
If the ROI needs to be adjusted make sure to make the changes
immediately after the ROI is displayed.
To Next Page
Loading...
