Measurement and Analysis
Vivid S5/Vivid S6 User Manual 361
R2424458-100 Rev. 2
To select the measurement
To select which measurement you want to display on the Fetal
Growth Curve Graph, do one of the following:
• To select a specific measurement:
• On the graph display, move the Trackball under the
<Measurement Type> field and press
SET.
The system displays a list of measurements (see
Figure 7-63).
• Move the Trackball to select the desired measurement
and press
SET.
The system displays the Fetal Growth Curve Graph for
the selected measurement.
• To scroll through all Fetal Growth Curve Graphs, adjust the
Graph Change control.
Figure 7-63: Fetal growth measurement type
To select the age to use
To plot the fetus age, the system allows you to use the
gestational age (GA) from the LMP, or to use the composite
ultrasound age (CUA). To select, adjust the Select GA control.
The information in the left column changes between CUA and
GA (EDD), and the data may change.
To Next Page
Loading...
