Quantitative Analysis
392 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Optimizing sample area
The sample area can be reshaped and labelled.
Reshaping a sample area
There are two ways of modifying a sample area: either from the
Update menu or by selecting the
SAMPLE SHAPE assignable.
Reshaping a sample area from the Update
menu
1. If necessary, press TRACKBALL until the QA trackball
assignment is selected.
2. Trackball to the sample area to reshape.
3. Press
UPDATE MENU in the trackball area on the control
panel.
The System menu is displayed.
4. Trackball to Set Sample area shape.
5. Press
SET.
A Dialogue window is displayed where the user can adjust
the height, the width and the angle of the sample area (see
Figure 8-3).
Figure 8-3: The sample area reshaping window
6. Drag the sliders to adjust the shape of the sample area as
desired.
7. Press OK to return to the Quantitative analysis window and
use the settings for the current analysis only.
OR
Press Set as default to return to the Quantitative analysis
screen and keep the settings as default.
To Next Page
Loading...
