GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-231
PRELIMINARY
7. Press [Y] to confirm the Hard Disk formatting command. Hard Disk formatting commences.
During this process, a visual indication of progress is displayed on the screen:
When Hard Disk formatting is complete, the system automatically reboots.
The following options are now displayed:
8. Proceed to perform the Software Installation procedure,
as described in Table 8-2 on page 8-213.
Table 8-5 Formatting and Partitioning the Hard Disk - Automatic Procedure
Step Instruction Expected Result
To Next Page
Loading...
