GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-237
PRELIMINARY
8-9-2 DVD/CD-RW Drive Replacement Procedure (cont’d)
6.) Disconnect the DVD USB cable and the DVD power cable from the rear of the DVD /CD-RW Drive,
as indicated in Figure 8-270.
7.) Slide the DVD /CD-RW Drive out to remove it from the compartment, as shown in Figure 8-271.
Figure 8-270 Mini USB Cable Connected at Rear of DVD/CD-RW Drive
Figure 8-271 Removing the DVD/CD-RW Drive
To Next Page
Loading...
