GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 3 - System Setup 3-11
PRELIMINARY
6.) Lower the wheeling ramp into the unloading position, as shown in Figure 3-7 on page 3-11.
7.) Carefully remove the three foam supports (from the side and top of the monitor) - see Figure 3-8.
Figure 3-7 Wheeling Ramp in Unloading Position for Scanner Removal
Figure 3-8 Foam Supports Protecting the LCD Screen
Foam Supports
Console Holder
Unscrew to remove
Console Holder
Unscrew to remove
Console Holder
Wheeling Ramp
Adhesive tape
To Next Page
Loading...
