Peripherals Installation
Vivid T9/Vivid T8 – Basic Service Manual 3-37
5795591-100 English Rev. 3
3-8-3-5 Wireless network adapter(continued)
8. If the wireless network is to be configured for WPA/WPA2
Enterprise and a customer specific certificate is to be
installed on the system, this can be done by use of the
certificate dialog available from the LDAP config page.
a. First go to LDAP config.
Figure 3-17. LDAP Config Screen
b. Then click on the Certificates... button to open the
Certificate dialog.
Figure 3-18. Certificate Dialog
To Next Page
Loading...
