System Setup
3-38 Vivid T9/Vivid T8 – Basic Service Manual
5795591-100 English Rev. 3
3-8-3-5 Wireless network adapter(continued)
9. After you have finished setting up your connection, press
OK.
The system will then try to establish a connection to your
network. A dialog will be shown on screen while this is in
progress.
Figure 3-19. Connecting to Network Dialog
10. Once a connection has been established you will see the
status Connected in the Wireless Settings page, next to
the network you have connected to.
All network connections that are configured will also be
displayed with a star icon.
Figure 3-20. Connection Established
NOTE: Whenever connection to a new/different wireless network is
required, it will be necessary to repeat all procedure steps
above.
To Next Page
Loading...
