GE MEDICAL SYSTEMS - KRETZTECHNIK RAFT VOLUSON® 730PRO / 730PROV (BT´04)
D
IRECTION KTI105947, REVISION 2 SERVICE MANUAL
4-38 Section 4-5 - Backup and Restore Database, Preset Configurations and Images
4-5-4 Load Full Backup (Presets, Configurations & Application Settings) (cont’d)
1.) Press the UTILITIES
key on the control panel. The menu area changes to the Utilities menu.
2.) Select the SYSTEM
item from the menu area to activate the setup desktop screen.
3.) Select the
BACKUP page and click the LOAD button of the “Full Backup” group.
4.) Choose the Destination (e.g., Network Drive).
5.) Click on the backup to be restored (additional information is displayed in the table).
6.) Select the NEXT
button. The following window will be displayed.
7.) Select the data to be restored to the Voluson® 730Pro / 730ProV system.
NOTE: For description of the check box names review: A full backup always contains the following data
Figure 4-31 Full Backup Load
Figure 4-32 Select Data to be restored
choose destination
select backup
click Next
To Next Page
Loading...
