GE MEDICAL SYSTEMS - KRETZTECHNIK DRAFT VOLUSON® 730PRO / 730PROV (BT´04)
D
IRECTION KTI105947, REVISION 2 SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-1
Chapter 8
Replacement Procedures
Section 8-1
Overview
8-1-1 Purpose of Chapter 8
This chapter contains replacement procedures for different modules and their subsystems.
NOTICE
The Manpower, time and Tools indicated in the Sub-sections include all requirements from
Preparations to Installation Procedures.
WARNINGWARNING
No covers or panels should be removed from the system (high-voltage risk).
Service and repairs must only be performed by authorized personal.
Attempting do-it-yourself repairs invalidate warranty and are an infringement to
regulations and are inadmissible acc. to IEC 60601-1.
The waste of electrical and electronic equipment must not be disposed as unsorted municipal
waste and must be collected separately.
Please contact the manufacturer or other authorized disposal company for information
concerning the decommission of your equipment.
Table 8-1 Chapter 8 Contents
Section Description Page Number
8-1
Overview
8-1
8-2
Ultrasound Application Software (UIS) Installation Procedure
8-2
8-3
User Settings Only (Application Settings) Loading Procedure
8-8
8-4
Full Backup (Presets, Configurations & Appl. Settings) Loading Procedure
8-8
8-5
Service Platform (SSW) Upgrade Procedure
8-9
8-6
Electronic User Manual (EUM) Upgrade Procedure
8-11
8-7
Software and Functional Checks after the Upgrade
8-14
8-8
Replacement or Activation of Options
8-15
8-9
Transfer of Patient Database and Images from System-to-System
8-17
8-10
Replacement of the Monitor Task Lamp
8-22
8-11
Replacement of the Trackball top fixation ring
8-23
8-12
Replacement of Digipots and TGC Slider controls
8-23
To Next Page
Loading...
