GE MEDICAL SYSTEMS - KRETZTECHNIK DRAFT VOLUSON® 730PRO / 730PROV (BT´04)
D
IRECTION KTI105947, REVISION 2 SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-3
8-2-4 Preparations (cont’d)
1.) Press the UTILITIES
key on the control panel once to display the Utilities menu.
2.) Select the SYSTEM
item from the Utilities menu - which is displayed on the left side of the screen.
3.) Select the
SYSTEM INFO page on the System Setup desktop screen to see which Software/Hardware
version is installed in the unit.
4.) Select the
OPTION page on the System Setup desktop screen to see which Options are installed.
Figure 8-1 Version check
Figure 8-2 Option page
NOTICE
Please print out the OPTION page or write down all the option codes which are shown in the “Key” fields!
currently installed
Software version
D = Demo
on the date shown in the “Valid” column)
(Option is activated for demo and expires
I = Inactive
(Option is not activated)
P = Permanent
(Option is permanently activated [purchased])
To Next Page
Loading...
