GE MEDICAL SYSTEMS - KRETZTECHNIK DRAFT VOLUSON® 730PRO / 730PROV (BT´04)
D
IRECTION KTI105947, REVISION 2 SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-23
Section 8-11
Replacement of the Trackball top fixation ring
8-11-1 Manpower
One person, 5 min.
8-11-2 Trackball top fixation ring - Replacement Procedure
1.) Remove the fixation ring by turning it counterclockwise.
2.) Mount the fixation ring by turning it clockwise.
Section 8-12
Replacement of Digipots and TGC Slider controls
8-12-1 Manpower
One person, 5 min.
8-12-2 Tools
small-sized slotted screwdriver or tweezers
8-12-3 Cap and/or Spring - Replacement Procedure
1.) Remove the cap (for Rotation digipots or for Slider-potentiometer TGC).
2.) Mount the cap (for Rotation digipots or for Slider-potentiometer TGC).
Figure 8-29 Trackball with top fixation ring
rotate counterclockwise
to remove the fixing ring
rotate clockwise to
mount the fixing ring
To Next Page
Loading...
