GE MEDICAL SYSTEMS - KRETZTECHNIK RAFT VOLUSON® 730PRO / 730PROV (BT´04)
D
IRECTION KTI105947, REVISION 2 SERVICE MANUAL
1-2 Section 1-1 - Overview
1-1-3 Typical Users of the Basic Service Manual
• Service Personnel (installation, maintenance, etc.).
• Hospital’s Service Personnel
• Contractors (Some parts of Chapter 2 - Pre-Installation)
1-1-4 Models Covered by this Manual
1-1-5 Purpose of Operator Manual(s)
The Operator Manual(s) should be fully read and understood before operating the Voluson® 730Pro /
730ProV and also kept near the unit for quick reference.
Table 1-2 Voluson® 730Pro / 730ProV Model Designations
Part Number Description
H48651BA Voluson® 730Pro / 730ProV (BT´04) Console 230V/50Hz
H48651BB Voluson® 730Pro / 730ProV (BT´04) Console 115V USA
H48651BC Voluson® 730Pro / 730ProV (BT´04) Console 115V
H48651BD Voluson® 730Pro / 730ProV (BT´04) Console 100V JAPAN
H48651BE Voluson® 730Pro / 730ProV (BT´04) Console 230V KOREA
H48651BF Voluson® 730Pro / 730ProV (BT´04) Console 230V CHINA
NOTICE
This manual applies to:
• Voluson® 730Pro / 730ProV systems with Serial number A31501 - 33999,
• Voluson® 730Pro / 730ProV systems with Software version 4.x.x installed,
• Voluson® 730Pro / 730ProV systems that were upgraded to BT´04, and/or
• Voluson® 730Pro / 730ProV systems that were upgraded to BT´05 (SW 5.x.x installed)
BT Version:
Voluson® 730Pro / 730ProV systems with serial number less than < A34000 and software version 5.x.x
(simply called: upgraded to BT´05), do have BT´05 software, but hardware is the same than BT´04
systems have!
NOTICE
The Voluson® 730Pro V is a downgraded version of the Voluson® 730Pro.
That means not all options are available on the Voluson® 730Pro V
(marked with * in the sections of the Manuals).
The Voluson® 730Pro V is only distinguished by the System type, see: Figure 7-1: System Setup -
System Info page (e.g. V730 Pro) on page 7-2; it has NO own serial number!
To Next Page
Loading...
