GE MEDICAL SYSTEMS - KRETZTECHNIK DRAFT VOLUSON® 730PRO / 730PROV (BT´04)
D
IRECTION KTI105947, REVISION 2 SERVICE MANUAL
Chapter 3 - Installation 3-33
3-7-4 Adjustment of Printer Settings
1.) After system restart, press the UTILITIES key, and then select SYSTEM from the menu area.
2.) Select the
SERVICE page. The “password window” appears automatically.
3.) Enter the password SHE and click the ACCEPT
button.
4.) Click on the PRINTER
button.
5.) Select the desired printer from the pull-down menu and click the EDIT SETTINGS
button.
6.) Confirm the warning message with the YES
button. The “Printer Properties” appear.
To adjust the HP 990cxi / HP 995c printer see: Section 3-7-4-1 "HP 990cxi / HP 995c- Printer Settings" .
To adjust the UP-D21MD / UP-D23MD Printer see: Section 3-7-4-2 "UP-D21MD / UP-D23MD - Printer
Settings" .
To adjust the Bluetooth printer see: Section 3-7-4-3 "HP 5600 Series / Olivetti Job Jet 210 - Printer
Settings"
Figure 3-42 Select the desired printer
WARNINGWARNING
After each printer installation, the leakage currents have to be measured
acc. IEC 60601-1 resp. UL2601-1.
select the desired printer
from the pull-down menu
To Next Page
Loading...
