GE Voluson 730Pro - Left Trackball Key (Left Mouse Button); System Setup; Trackball (Mouse Position); Upper Trackball Key (Right Mouse Button)

GE MEDICAL SYSTEMS - KRETZTECHNIK RAFT VOLUSON® 730PRO / 730PROV (BT´04)
D
IRECTION KTI105947, REVISION 2 SERVICE MANUAL
3-40 Section 3-8 - System Configuration
3-8-3 System Setup
Modifications of system parameters are supported by diverse dialog pages and windows on the system
setup desktop:
• General - Date, Time, Clinic Name, Language, Screen saver, etc.
• User Settings - to save User programs, 3D/4D programs, Auto Text, Doppler 2D Refresh, etc.
• Peripherals - to adjust assignment of PRINT
keys, Foot Switch, selection of Save Destination, etc.
•Option - shows which options are installed in the system
• Service - enter the password to get access to the Service Tools functions
• Backup - Save/Load User Settings Only, Save/Load/Delete Full Backup
•Network - to set up all DICOM, Sonoview and Network configuration nodes
• System Info - shows which Software/Hardware version is installed in the system
To invoke the Setup procedure:
In general operations are done with the trackball and the trackball keys (mouse emulation).
1.) Press the UTILITIES
key on the Control Panel. The menu area changes to the Utilities menu.
2.) Select the SYSTEM
item to activate the setup desktop screen.
Trackball (mouse position):
positions the pointing device (arrow) on the desktop
left trackball key (left mouse button):
sets, fixates markers and activates pages/buttons etc. marked by the pointing device
upper trackball key (right mouse button):
no function in system desktop
right trackball key (left mouse button):
sets, fixates markers and activates pages/buttons etc. marked by the pointing device