GE Voluson i BT06 - Page 337

GE VOLUSON i / VOLUSON e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-33
MotCtrl Unit: No probe reference position signal detected
Confirm the message by pressing the OK button and
restart the system. Check functionality with a different 3D/
4D probe. If the message appears again, please contact
the technical support.
MotionColor-DSC 1st:Memory allocation failed restart the system
MotionColor-DSC 2nd:Memory allocation failed restart the system
Motion-DSC:Memory allocation failed restart the system
MSG_ERROR_INIT_FAILED
Check connection from US machine to VCR, VCR has
power and is on.
MSG_ERROR_NO_ACK check VCR cables and try again
MSG_ERROR_NO_MEDIA put cassette into drive of VCR
MSG_ERROR_NO_RESPONSE check VCR cables, casette,... and try again
MSG_ERROR_WRITE_PROTECTED
remove cassette from VCR and put writeable cassette into
drive of VCR.
No CD Writer found
check the connection and the Power cable - plug the cable
off and on and try again. (restart the system)
No disc or device not ready!
insert disk, if fails again reboot and try again (with another
disk)
Not enough space.
(Not enough space on destination to hold the backup data.)
select another destination to save Full Backup
Overflow restart the system
overview window creation failed restart the system
Persistance Out Of Range press ok and save this user-setting once again
Persistence coeff page index too big restart the system
pGetActualUnitBuffer failed, RepresentationManager is not
initialized
restart the system
pGetActualUnitBuffer failed, RepresentationManager is not
initialized
restart the system
Please plug off and on probe and try again
plug of and on the probe and try again, plug it on a different
probe connector.
PlxMemCheck ERROR restart the system
pNextUnitCompleted failed, RepresentationManager is not
initialized
restart the system
PowerManager: HRS not initialized restart the system
PowerSpecBuffer memory allocation failed restart the system
PRF_GeneratorBoundary: BBC Ensemble Limitation out of limit restart the system
PRF_GeneratorBoundary: BBCPW Ensemble Limitation out of
limit
restart the system
Error Messages Actions