GE Voluson i BT06 - Page 443

GE VOLUSON i / VOLUSON e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
Chapter 9 - Renewal Parts 9-13
Table 9-6 Electronic Parts
Item Part Name Part Number Description
Qty CRU FRU
222
GPC1-1a - BackEnd (PC) Assy
KTZ220334 ETX Base Board incl. Central Processing Unit (CPU) 1 N 1
223
GPC2-2a - BackEnd (PC) Assy
KTZ220640
ETX Base Board incl. Central Processing Unit (CPU)
(can replace GPC1, SW 6.0.2 or higher is required and
has to be installed immediately after replacement)
1N 1
224
GPC3 - BackEnd (PC) Assy
KTZ280085
ETX Base Board incl. Central Processing Unit (CPU)
(PMC Version 23); (can replace GPC2);
SW 6.0.2 or higher is required and has to be installed
immediately after replacement
1N 1
225
GPC10 - Back End (PC) Assy
KTZ302039
ETX Base Board incl. Central Processing Unit (CPU)
will be used at Voluson i SNo B03501 and higher and
Voluson e B54177 - B54195, B54216,
B54501 and higher
SW 7.1.4 and SW 8.2.0 Rev.B or higher is required
and has to be installed after replacement
1 N 1
226
GPM1 - Probe and MUX Assy
KTZ196093
Probe & MUX (multiplexer) board +
Probe connector Assy
1 N 1
227
GPM2 - Probe and MUX Assy
KTZ300142
Probe & MUX (multiplexer) board +
Probe connector Assy (can replace GPM1)
1 N 1
228
GPM3 - Probe and MUX Assy
KTZ300329
Probe & MUX (multiplexer) board +
Probe connector Assy (can replace GPM2)
1N 1
229
GPM4 - Probe and MUX Assy
KTZ301298
Probe & MUX (multiplexer) board +
Probe connector Assy (can replace GPM3)
1N 1
230
GPM5 - Probe and MUX Assy
KTZ301759
Probe & MUX (multiplexer) board +
Probe connector Assy (can replace GPM4)
1N 1
231
GPM50 - Probe and MUX Assy
KTZ301008
Probe & MUX (multiplexer) board +
Probe connector Assy
(can only be used on Voluson i/e BT’07 or higher)
1 N 1
232
RBI1-1b.P1 - RF-Board
KTZ196055 Radio Frequency “Controller” board 1 N 1
233
RBI2-2e.P2 - RF-Board
KTZ196095
Radio Frequency “Controller” board
(can replace RBI1)
1 N 1
234
RBI3a.P3 - RF-Board
KTZ196212
Radio Frequency “Controller” board
(can replace RBI1 and RBI2)
1N 1
235
RBI4.P4 - RF-Board
KTZ303113
Radio Frequency “Controller” board incl. Coax-cable
(can replace RBI1, RBI2 and RBI3)
1N 1
236
RBF1-1b - “Beamformer” Board
KTZ196094 Transmitter/Receiver, “Beamformer” Board (1 pcs.) 2 N 1
237
RBF2.P3 - “Beamformer” Board
KTZ196182
Transmitter/Receiver, “Beamformer” Board (1 pcs.)
(can replace RBF1)
2 N 1
238
GPP2c - DC/DC Power Supply Assy
KTZ196092 Power Supply Module 1 N 1
239
GPP3 - DC/DC Power Supply Assy
KTZ196134 Power Supply Module (can replace GPP2) 1 N 1
240
GPP4 - DC/DC Power Supply Assy
KTZ300141 Power Supply Module (can replace GPP2 and GPP3) 1 N 1
241
GPP5 - DC/DC Power Supply Assy
KTZ300947
Power Supply Module
(can replace GPP2, GPP3 and GPP4)
1N 1