GE DRAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
Chapter 5 - Components and Functions (Theory) 5-71
7.) Press the [-] key on the keyboard to change the “Boot Priority” order:
- 1st Boot: from Hard Disk (SATA 2 Drive) to DVD-Drive (SATA 0 Drive)
- 2nd Boot: from DVD-Drive (SATA 0 Drive) to Hard Disk(SATA 2 Drive).
8.) Press the F10 key on the alphanumeric keyboard.
9.) Confirm the message with Yes and Enter to reboot the system.
Proceed with
Figure 5-44 Save & Exit -> Set Priority
To Next Page
Loading...
