GE RAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
8-160 Section 8-52 - Replacing optional Peripherals
11.)Assemble Printer assembly.
12.)Push the printer assembly till it makes contact with sheet metal chassis.
Figure 8-225 Assembling printer
13.)Carefully insert the printer base plate in to the chassis slot.
14.)Assemble the printer base plate with chassis using 2 screws (2159634-screw BH M4X10).
15.)Assemble FRONT CABINET BEZEL ASSY BT16.
Figure 8-226 Assembling printer base plate
Printer Assembly
Push the printer assembly
Printer base plate
Assemble printer base plate
with two screws
FRONT CABINET
BEZEL ASSY BT16
To Next Page
Loading...
