GE DRAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-15
8.) After clicking Install, the SW update procedure starts.
The system saves Full Backup in silent mode on R:, then it reboots into LINUX.
9.) Check disk is performed automatically - restart.
A silent "Rollback" image from C:\ is stored on R:\. After executing all LINUX commands, the system
reboots again.
10.)3 dots (one after the other) appear on the screen.
Figure 8-15 Installation in progress
Figure 8-16 Check disk is performed automatically
To Next Page
Loading...
