GE RAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
8-54 Section 8-18 - Replacement of OPIO BUTTON SET
5.) Pull 10 encoder key caps out. Refer to the figure below.
6.) Unscrew 2 screws on trackball and disconnect the cable to remove the trackball. Refer to the figures
below.
Figure 8-68 Pulling 10 encoder key caps out
Figure 8-69 Unscrew 2 screws on trackball
To Next Page
Loading...
