GE DRAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-161
16.)Insert the printer USB cable and printer power cable.
17.)Insert the printer power cable in to the nest box.
18.)Insert the printer USB cable in to the nest box.
Figure 8-227 Inserting Printer USB and Power cable
19.)Check the printer USB cable and power cable to passing through in EMI cover slot. Then screw
2 screws and assemble printer EMI cover 1 and 2.
20.)Route the B/W printer USB and power cable through the left side cable clamp.
Figure 8-228 Routing the printer cables
Printer
Power Cable
Printer
USB Cable
Inserting Printer power
cable into the nest box
Inserting Printer USB cable
into the nest box.
EMI cover slot
Left side clamp
To Next Page
Loading...
